DODGE P2B-GT-015-LL Mounted Units & Inserts

C:9.55 kN; N:12mm; Recommended tightening torque for set screw:3.2 Nm; Weight:0.4 kg; Designation of closed end cover:SCC203; Dz:46 mm; S:6 mm; L:57 mm; e:15 mm; A2:31 mm;

Recommended tightening torque for set screw:8 Nm; Weight:0.61 kg; s1:27.8 mm; C:19.5 kN; C0:11.2 kN; d:30.16 mm; Designation of housing:PF206-; A:20 mm; J:90.5 mm; B:23.8 mm;

L:126.5 mm; A:32 mm; d:15 mm; H:31.8 mm; H1:12.5 mm; Z:45.1 mm; A1:22.5 mm; G:M6x1; Designation of housing:PLE204N-; C0:6.65 kN;

S:34.1 mm; N:19mm; s1:57.6 mm; T min.:-20 °C; J:170 mm; H3:145; e:16 mm; T max.:200 °C; L:205 mm; d1:86 mm;

Preload level:7; Characteristic outer ring frequency, BPF0:5.23 Hz; Axial rigidity:23 N/µm; Characteristic cage frequency, FTF:0.4 Hz; Characteristic inner ring frequency, BPFI:7.77 Hz; Characteristic rolling element frequency, BSF:4.75 Hz; D6:21.9 mm; Precision class:P4; Preload value:0.032 kN; rs

Static load, C0:5.8 kN; B:12 mm; Mass:0.08 kg; Radial clearance class:C3; ra max:0.6 mm; Min operating temperature, Tmin:-20 °C; Characteristic outer ring frequency, BPF0:4.11 Hz; f0:14.5; d1:31.6 mm; da max:31.6 mm;

Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; T max.:200 °C; J1:72 mm; L:108 mm; A:38 mm; A1:18 mm; A2:52.2 mm; G:M6x1; Designation of bearing:UC209-28G2T20;

A:29.5 mm; Recommended tightening torque for set screw:5.5 Nm; L:86 mm; Designation of closed end cover:SCC204; T min.:-20 °C; B:31 mm; A2:37.3 mm; C0:6.65 kN; d:12 mm; J:63.5 mm;

d:45 mm; Mass:0.24 kg; Da max:69.5 mm; Characteristic inner ring frequency, BPFI:12.08 Hz; d2:52.4 mm; D1:66.31 mm; Nlim (oil):33,000 rpm; rs min:1 mm; Max operating temperature, Tmax:120 °C; Radial rigidity:290 N/µm;

D:80 mm; Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:0.81 kN; a max:3.28 mm; Characteristic rolling element frequency, BSF:4.84 Hz; Characteristic outer ring frequency, BPF0:3.61 Hz; Nlim (grease):8,700 rpm; rNs min:0.5 mm; r0 max:0.6 mm; b max:2.2 mm;

N:M12; J:85 mm; T min.:-40 °C; Recommended tightening torque for set screw:11.5 Nm; s1:20.6 mm; Designation of housing:PG209-; Designation of bearing:US209G2T04; Weight:2.15 kg; H:53.9 mm; L1:40 mm;

G:M6x1; L3:51 mm; Designation of housing:T204-; T min.:-40 °C; s1:24.2 mm; SW:3.18 mm; C:12.8 kN; Weight:0.75 kg; d1:32.4 mm; A:32 mm;

Weight:0.85 kg; C0:7.88 kN; B1:44.3 mm; L:139 mm; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; N:11mm; J:104.2 mm; A:36.5 mm; d1:37.4 mm;

S:7.5 mm; N:11mm; Dz:60 mm; N1:19 mm; L1:39 mm; A1:21 mm; J:103 mm; H:36.5 mm; C:14 kN; d:22.22 mm;

Designation of housing:FC210N-; Dz:100 mm; A2:42.6 mm; e:10 mm; T min.:-20 °C; J:138 mm; H3:110; d:49.21 mm; L:165 mm; T max.:200 °C;