Cam Follower and Track Roller - Stud Type

Contact Now

Stud type track roller bearings CFS3V IKO cam follower bearings is roller bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings have a high load carrying capacity and are therefore extremely.Cam Followers (Stud Type Track Rollers) Without seal With seal 1. Types Cam followers are available in the standard types shown in Table 1. These standard bearings have a screwdriver slot built into the stud head, while the outer rings have a cylindrical outside surface. Cam followers, which are equipped with a thick outer ring.

 

Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers.

 

 

SMITH CR-1-5/8-XBC-SS Cam Follower and Track Roller - Stud Type

2 mm 330
1.1 mm 4150 kN

SMITH CR-1-1/2-XBC-SS Cam Follower and Track Roller - Stud Type

30 mm 33.228 mm
130 mm 1.4

SMITH CR-1-1/8-XBC-SS Cam Follower and Track Roller - Stud Type

134 mm 2 mm
111.5 mm 1.3

SMITH CR-1-1/4-XBC-SS Cam Follower and Track Roller - Stud Type

1/8 NPT EPR 11
111.125 mm 2 x LOR 187

SMITH CR-1-XBC-SS Cam Follower and Track Roller - Stud Type

3800 rpm 30.00 mm
3800 rpm One Seal

SMITH CR-7/8-XBC-SS Cam Follower and Track Roller - Stud Type

65 mm 3
101 mm 98 mm

SMITH CR-1/2-XBC-SS Cam Follower and Track Roller - Stud Type

2 x 3/8-16 UNC 2000 r/min
92.5 kN 549.275 mm

SMITH CR-3/4-XBC-SS Cam Follower and Track Roller - Stud Type

51200 N 5000 rpm
45.000 mm 54000 N

SMITH CR-5/8-XBC-SS Cam Follower and Track Roller - Stud Type

1 19
1.02 60 mm

SMITH CR-1-XB-SS Cam Follower and Track Roller - Stud Type

39.6 mm 7.938 mm
120 N 1.06

SMITH CR-1-1/8-XB-SS Cam Follower and Track Roller - Stud Type

3/8 NPT 4.763 mm
2150 r/min 140 mm
1/11