Insert Bearings Spherical OD

Contact Now

Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

 

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.Insert bearings are also available in free spinning design and a black oxide finish upon request. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

 

 

AMI UC319 Insert Bearings Spherical OD

50000 1200 fp/min
3/4 in 1-1/2 in

AMI UC320 Insert Bearings Spherical OD

Oil-Filled Grooves 3/4 in
Bronze 50000

AMI UC320-63 Insert Bearings Spherical OD

6100 52211-fag
90mm 45mm

AMI UC318-56 Insert Bearings Spherical OD

Lubrication Fitting 216 mm
70 mm Set Screw

AMI UC319-60 Insert Bearings Spherical OD

Steel Needle Rollers
17200 lbf 1.2500 in

NTN UC208D1UW3 Insert Bearings Spherical OD

Flat 3.0000 in
Sealed 5.5000 in

NTN UC208D1 Insert Bearings Spherical OD

9mm 25mm
4.94 42mm

AMI MB5 Insert Bearings Spherical OD

20 mm Periodic lubrication
10 N/mm2 30B

AMI MB4-12 Insert Bearings Spherical OD

3.189 in 2340 RPM
421 kN 01

AMI MB4 Insert Bearings Spherical OD

Non-Expansion Bearin Click here
Sealed Open Cap Four-Bolt Flange

AMI MB6 Insert Bearings Spherical OD

47 mm 27 mm
25 ° 30 mm

AMI MB6-20 Insert Bearings Spherical OD

AMI MB6-20
1 pcs Negotiable
1/12